Scannertainment BCT8 Details

BCT8 Features

- 250 User Programmable Memories
- BearTracker Warning System
- Preprogrammed Service Search
- Preprogrammed Highway Patrol
Frequencies by State
- Search Lockouts
- Backlit Display
- 100ch/sec Scan Speed (Max)
- Priority Operation
- Trunking (BCT8) - Motorola Analog
Trunking, EDACS/EDACS SCAT, LTR
- Public Safety Scanner

bct8

[ View Image]

$165.89

1.	Frequency range:
		Frequency	Step	Mode
		25.0000 to 27.9950 MHz	5 kHz	AM
		28.0000 to 29.9950 MHz	5 kHz	FM
		30.0000 - 49.9950 MHz	5 kHz	FM
		50.0000 - 54.0000 MHz	5 kHz	FM
		108.0000 - 136.9875 MHz	12.5 kHz	AM
		137.0000 - 143.9950 MHz	5 kHz	FM
		144.0000 - 147.9950 MHz	5 kHz	FM
		148.0000 - 174.0000 MHz	5 kHz	FM
		406.0000 - 419.99875 MHz	12.5 kHz	FM
		420.0000 - 449.9875 MHz	12.5 kHz	FM
		450.0000 - 469.9875 MHz	12.5 kHz	FM
		470.0000 - 512.0000 MHz	12.5 kHz	FM
		806.0000 - 823.9875 MHz 849.0125 - 868.9875 MHz 894.0125 - 956.0000 Mhz	12.5 kHz	FM

2.	Pre-programmed frequencies specific to each state (except Hawaii).
3	Pre-programmed Trunked and conventional Highway Patrol frequencies
4.	Highway Patrol Priority Alert -Receive audible and visual alert when within three miles of many Highway Patrol/State units
5.	Pre-programmed frequencies for the following categories: -Local Police and County Sheriffs -Fire and Emergency Medical Service -News Media -Weather (continuous NOAA weather and Canadian Coast Guard broadcasts) -CB Radio -Aircraft -Railroads -Marine Band -Department of Transportation
6.	Trunk Tracking – Follow VHF High Band UHF 800MHz trunked public safety and public service systems just as if conventional two-way communications were used.
7.	Multi-Track – Track more than one trunking system at a time. Scan conventional and trunked systems at the same time.
8.	250 Channels – Program one frequency into each channel. You must have at least one channel programmed to use the Scan mode.
9.	13 Bands – Includes 13 bands, with aircraft and 800 MHz.
10.	5 Banks – 5 banks with 50 channels each are useful for storing similar frequencies to maintain faster scanning cycles or for storing all the frequencies of a trunked system.
11.	25 MHz-956 MHz – Indicates the range of frequencies that can be searched within the bands of your scanner. Note: The frequency coverage is not continuous and excludes the cellelar telephone Band.
12.	5 Priority Channels – You can assign one priority channel in each bank. Assigning a priority channel allows you to track activity on your most important channel(s) while monitoring other channels for transmissions. You can also assign trunking priority talkgroups.
13.	Data Skip – Allows your scanner to skip unwanted data transmissions and reduces birdies.
14.	Direct Channel Access – Go directly to any channel without entering programming mode.
15.	Turbo Search – Increases the search speed to 300 steps per second. This applies only to transmission bands with 5 kHz steps.
16.	PC Programmable – Allows you to easily program all frequencies and Trunking Talk Groups into your BCT8 through Uniden BCT8 Scanning software running on your PC. – For more information on BCT8 SS Programming software visit our website at scanner.uniden.com.